Speed: 2900RPM and 1450RPM;
Suction: 50~200mm;
Flow/Capacity: 6.3~400m /h;
Head: 5~125m
Flow:4-8m
Head:20-0m
Efficiency:20-40%
Shaft Power:0.68-8.36KW
NPSH:2.4/2.5/2.8m
Speed:2900r/min
Structure: Single-stage single-suction
Flow rate: ≤400 m3/h;
Head: 125 m;
Standard: ISO2858;
Caliber: 32-300mm;
Flow rate: ≤2000m3/h;
Head: ≤160m;
Working pressure: 2.5MPa;
Speed: 1450RPM/2900RPM
Capacity: 6.3m3/h-400m3/h;29- 1761GPM
Head: 5-125m; 16-410feet
Temperature: -20C-105C; 68°F-221°F
Max. working pressure: 1.6Mpa
Compliant with ISO2858, DIN EN 22858.
Flow: up to 400 m3/h, max 1761 GPM
Head: 80m;410 feet
Temperature ratings from -20 °C to +150 °C; -68 °F to +302 °F
FSB series pump is a horizontal, centrifugal pump for chemical process which is in compliance with ISO/ASME/ANSI. It is a thermoplastic centrifugal pump(plastic centrifugal pump) for corrosive liquid with viscosity similar to water without solid.
Full detailMaterial: Stainless Steel
Application: For leakage, flammable, explosive liquid
Compliant with ASME B73.3-2003
Flow rate: 1~160 m3/h; 4.4-704GPM
Total delivery head: 17~62m; 17-203feet
Temperature: -20 °C to 100 °C (-4°F to 212 °F)
Close Coupled design
Flow: 7 to 120m3/hr; 31 to 528 GPM
Head: 19 to 52 m; 62 to 170 feet
Temperature: -20 °C to +100 °C; 68 °F to 212 °F
High efficiency and energy conservation
Flow: 15to 120m3/hr; 66 to 528 GPM
Head: 46 to 82m; 150 GPM to 269 feet
Temperature: -20 °C to +100 °C; -4 to 212 °F
Operating Range:
Flow: 7 to 120m³/hr; 31 to 528 GPM
Head: 22 to 50m; 22 GPM to 164 feet
Temperature: -20 °C to +100 °C; -4 to 212 °F
For Difficult-to-seal liquids
Small flow rate and low head
Operating Range:
Flow: 4 to 15m³/hr
Head: 9 to 22m
Temperature: -20 °C to +100 °C
Operating Range
Flow: 15 to 25m³/hr
Head: 24 to 26m
Temperature: -20 °C to +100 °C
Slurry Pump, for high corrosion liquid with particles
Max. Flow: 1600m3 / h
Max. Head: 80m
Temperature: -20 °C to +85 °C
Capacity:3.2 m3/h;
Head:20-32m;
Suction lift: 6.5m
Speed:2900 r/min
Power:1.1/1.5KW
Low sump application, self-priming pump
Flow rates: 1.5-110m3/hr
Total delivery head: 15-70m
Temperature: -20 °C to +80 °C
Self-priming lift: 1-3m
Self-priming function
Flow rate: 3~60 m3/h;
Total delivery head: 28~49m;
Temperature: -20 °C to +80 °C
Maximum flow rate: 200m³/h;
Maximum pressure: 2.4MPa or higher
Home |About Us |Products |Industries |Core Competitiveness |Distributor |Contact Us | Sitemap | Privacy policy | Terms and Conditions
Copyright © ghionchionpump.com All Rights Reserved